Design of knuckle joint: Step 1) Diameter of Rod: d : =? Consider tensile failure of Rod 1. P =σt x A , 150 x 103 = 75 x π/4 xd2 , d = 50.4 mm 52 mm ( say)
Using Imperial relations Diameter of Knuckle pin Outside
Factors to be considered for selection of material for design of machine elements a) Availability: Material should be available easily in the market. b) Cost: the material should be available at cheaper rate. c) Manufacturing Consideration: the manufacturing play a vital role in selection of material and the material should suitable for required manufacturing process. d) Physical properties: like colour, density etc. f) Mechanical properties: such as strength, ductility, Malleability etc. g) Corrosion resistance: it should be corrosion resistant.
Design of Hollow shaft: Given Data: T =4750 N-m = 4750 X 103 N-mm , Ʈ = 50 N/mm2 , K=Di/Do =0.4 The hollow shaft is designed on the basis of strength from the derived torsion equation. 4750 X 103 N-mm ---- Thus Do= 79.18 mm 80 mm ( Say ) Di = 0.4 x Do = 0.4 x 80 = 32 mm
Cotter Joint: " A cotter joint is temporary joint and used to connect two coaxial rods or bars which are subjected to axial tensile and or compressive forces."
It consist of
1) spigot : It is the male part of the joint , it has a rectangular slot for passing the cotter through it. Spigot has a collar which rests against the socket end.
2) socket :It is the female part of the joint, it also has a rectangular slot for passing the cotter through it. It has a circular hole in which spigot fits.
Reasons for balancing of rotating elements of machine: The balancing of the moving parts both rotating and reciprocating of such machine is having greater importance. Because, if these parts are not balanced properly then the unbalanced dynamic forces can cause serious consequences, which are harmful to the life of the machinery itself, the human beings and all the property around them. These unbalanced forces not only increase the load on the bearings and stresses in various members, but also produces unpleasant and dangerous vibrations in them.
